60kW/120kWh Hybrid PV-Diesel Microgrid BESS Cabinet

60kW 120kWh integrated solar-diesel hybrid microgrid energy storage cabinet, built-in full set of core control modules including bidirectional PCS, multi-channel MPPT, BMS and EMS. Self-contained cooling and fire safety system, IP54 outdoor cabinet with multi remote communication interfaces. Automatic grid/off-grid seamless transfer function, flexible matching solar panels and diesel generators, widely used for industrial peak shaving and remote off-grid engineering projects, OEM parameter customization available.

Description

60kW/120kWh Solar-Diesel Hybrid Microgrid All-In-One Energy Storage Cabinet

For medium and large factories, industrial parks, mining areas and commercial complexes facing high peak electricity charges and unstable municipal grid power, our integrated solar-diesel microgrid cabinet is a one-stop all-in-one energy storage solution. This cabinet integrates 120kWh large-capacity lithium iron phosphate battery pack, 60kW high-power bidirectional PCS converter, four independent MPPT solar charge controllers, BMS battery management system, EMS intelligent energy scheduling system, constant temperature air cooling unit and automatic fire suppression device, all housed inside a single IP54 outdoor protection cabinet. It can coordinate photovoltaic panels and diesel generators to build a stable hybrid microgrid, cutting industrial power costs and eliminating power outage risks.

Core Differentiated Advantages

1. 120kWh Large Capacity + 60kW High Power Bidirectional PCS, Adapt to Heavy Industrial Load

Compared with small-capacity microgrid cabinets, this model upgrades to 120kWh energy storage capacity and 60kW bidirectional PCS, capable of supporting long-duration heavy load operation for production equipment. It can store massive low-price off-peak grid power and daytime solar power, then release energy during expensive peak hours to achieve obvious peak-valley arbitrage, greatly reducing monthly industrial electricity expenditure. The bidirectional PCS realizes two-way energy flow between battery, grid and loads.

2. Four Independent MPPT Channels, Flexible Matching Large PV Arrays

The cabinet is equipped with 4 separate MPPT tracking branches with a total solar input power of 100kW. Users can connect multiple groups of solar panels with different installation orientations, tilt angles and power capacities separately. Independent tracking avoids overall power generation drop caused by partial shading of individual PV strings, significantly improving the overall utilization rate of large-scale photovoltaic power stations.

3. Dual Working Modes with Zero-Interruption Seamless Switching

The embedded EMS energy management system supports two core operation modes and automatic seamless switching between them without manual intervention:
  • Grid-tied peak shaving mode: Store off-peak grid electricity and surplus solar power, discharge during peak power price periods to lower electricity bills; support feed-in of excess solar energy to the public grid.
  • Off-grid microgrid mode: Cooperate with solar PV and diesel generators to form an independent power supply system for mining sites, mountain villages and construction sites without municipal grid coverage.

    No power cut occurs during mode conversion, protecting sensitive industrial production equipment from shutdown losses.

4. IP54 Outdoor Cabinet with Built-In Integrated Cooling & Fire Protection

The whole cabinet meets IP54 dustproof and waterproof protection standard, allowing direct outdoor placement without extra rainproof equipment rooms. The built-in intelligent air conditioning cooling system automatically adjusts internal temperature to maintain stable operation of lithium batteries and electronic components in high-temperature or low-temperature environments. Matched automatic fire suppression system monitors battery temperature in real time and executes fire extinguishing actions once thermal runaway risks are detected, fully complying with industrial energy storage safety standards.

5. Multi-Channel Remote Cloud Monitoring System

Three communication methods are reserved inside the cabinet: RS485 wired industrial communication, WiFi wireless local connection and 4G cellular remote network. Project managers can log into the cloud monitoring platform to view real-time data including battery SOC, solar generation power, load consumption, grid voltage and equipment running status. The system supports automatic fault push alerts via mobile terminals, realizing unattended intelligent operation of the microgrid.

Technical Specification Table

Item Parameter
Full Product Model BAT-B120-60H3-100M4-HX1R5 Solar-Diesel Microgrid All-In-One Cabinet
Lithium Battery Capacity 120kWh Grade A LiFePO4 Battery Pack
Bidirectional PCS Rated Power 60kW
MPPT Solar Charging Power 100kW, 4 Independent MPPT Tracking Channels
Operation Modes Grid-Tied Peak Shaving / Off-Grid Microgrid, Automatic Seamless Switching
Integrated Standard Modules BMS Battery Management, Bidirectional PCS, EMS Energy Scheduling, Constant Temperature Air Cooling, Automatic Fire Suppression System
Cabinet Protection Grade IP54 Dustproof & Waterproof Outdoor Industrial Grade
Remote Communication Interfaces RS485 Industrial Bus, WiFi Wireless, 4G Cellular Network
Application Targets Medium & Large Factories, Industrial Parks, Mining Zones, Commercial Complexes
Customization Support OEM cabinet appearance, parameter adjustment and function expansion for large EPC energy storage projects

Target Application Scenarios

✅ Medium & large industrial factory peak-valley electricity arbitrage & uninterrupted production backup power

✅ Remote mining sites, oil fields and mountain construction off-grid solar-diesel microgrid

✅ Large commercial shopping malls, logistics parks energy storage peak shifting

✅ Border monitoring stations, rural mountain villages without stable municipal grid power supply

✅ Large-scale photovoltaic + diesel hybrid independent microgrid energy storage projects

✅ Agricultural industrial parks, livestock breeding bases stable off-grid power supply

Unique Product Competitive Edges

  1. 120kWh large storage capacity matched with 60kW high-power bidirectional PCS, specially designed for heavy-load industrial power demand
  2. Four independent MPPT channels, solve power generation loss problems of multi-group shaded photovoltaic arrays
  3. All core microgrid functional modules integrated into one cabinet, simplify project wiring and shorten construction cycle
  4. IP54 outdoor grade with built-in cooling and fire protection, stable operation all year round in complex outdoor environments
  5. Multi-mode remote cloud monitoring, realize unattended intelligent management of microgrid system
  6. Factory complete microgrid solution supply, support customized parameters for global energy storage EPC contractors and system integrators

FAQ

Q1: Can this cabinet realize automatic switching between grid-connected and off-grid modes?

A: Yes, the EMS energy management system supports fully automatic seamless switching without manual operation, and there will be no power interruption during the conversion process.

Q2: How many groups of solar panels can the MPPT part connect?

A: It is equipped with 4 independent MPPT channels, which can connect four different groups of solar panels separately for independent power tracking.

Q3: Can I remotely check the running data of the cabinet through mobile phone?

A: The cabinet reserves 4G and WiFi communication interfaces, you can bind the cloud platform to view real-time operating data and receive fault alarm information on mobile terminals.

Q4: Can the parameters and cabinet appearance be customized for large project orders?

A: We provide full OEM & ODM customization services for EPC engineering contractors, including adjusting power capacity, changing cabinet size and printing brand logos.