10kW & 12kW single-phase hybrid photovoltaic inverter integrates MPPT solar charging, battery management and grid-connected power transmission in one unit. The MPPT supports wide PV voltage range, and the device can work normally without battery configuration. It provides stable pure sine wave output, comes with wireless monitoring via WiFi and RS485 wired communication, and supports multi-machine parallel expansion. Suitable for residential distributed solar, rural off-grid power supply and small commercial solar storage projects, OEM & ODM customization available.

Description

10kW / 12kW Single-Phase Hybrid Solar Inverter

This single-phase hybrid solar inverter integrates solar MPPT charging, battery charge-discharge management and grid-connected inverter functions into one machine, covering two power tiers of 10kW and 12kW. It realizes multi-scene hybrid operation modes including grid-tied peak shaving, off-grid independent power supply and battery-free solar direct power supply. With high conversion efficiency and complete protection functions, it is widely used in household rooftop photovoltaic energy storage, rural off-grid power supply and small commercial distributed solar systems.

Core Product Advantages

1. Built-in High Voltage MPPT Controller, Wide PV Input Range

The internal integrated solar MPPT charge controller supports maximum PV open-circuit voltage up to 500V, matching mainstream household solar panel series combinations. The high-speed tracking algorithm improves solar energy utilization efficiency, with low no-load power consumption to reduce standby power loss. The MPPT can independently charge the battery pack or directly supply power to AC loads without battery access.

2. Pure Sine Wave Stable Output, Dual Mode Grid & Off-Grid Operation

The inverter outputs standard pure sine wave alternating current, compatible with all types of household electrical equipment without distortion or damage to sensitive loads. It supports automatic switching between grid-connected and off-grid modes:
  • Grid-tied mode: Store excess solar power into battery or feed surplus electricity to public grid for profit;
  • Off-grid mode: Provide stable independent power supply for areas without stable municipal grid;
  • Battery-free mode: Run directly by solar panels to supply daily loads, reducing initial system investment cost.

3. Compatible With Low-Voltage Lithium Batteries, Supports BMS Communication

Suitable for 42V~60V low voltage lithium iron phosphate battery packs, built-in battery management linkage function, can communicate with battery BMS to real-time monitor battery voltage, current and temperature. Intelligent charge-discharge logic automatically distributes power among solar, battery, grid and loads to cut household electricity expenses.

4. Multi-Machine Parallel Expansion Function

Multiple inverters can be connected in parallel to expand the overall system power capacity, meeting the power demand of large villas and small commercial buildings. The parallel system realizes balanced power distribution among each unit, stable operation without interference, convenient for phased capacity upgrade of photovoltaic systems.

5. Dual Communication Interface: WiFi + RS485 Remote Monitoring

Standard WiFi wireless module for mobile APP real-time monitoring of PV power generation, battery status, load consumption and grid interaction data. Reserved RS485 wired communication port, supporting centralized monitoring access to home energy management systems, remote parameter modification and fault alarm push.

6. Comprehensive Multi-Layer Safety Protection

Equipped with complete protection mechanisms including overcharge, overdischarge, overcurrent, short circuit, over temperature, over voltage and under voltage protection. It automatically triggers shutdown and fault alarm under abnormal working conditions to protect solar panels, batteries and household electrical loads, with long service life and high operation safety.

Complete Technical Parameter Table

Item 10kW Specification 12kW Specification
Rated Output Power 10kW 12kW
PV Input MPPT Quantity 2 channels 2 channels
Max PV Open Circuit Voltage 500V 500V
MPPT Operating Voltage Range 120V~450V DC 120V~450V DC
Max PV Input Current 2*28A 2*32A
Battery Voltage Range 42V~60V (default 48V) 42V~60V (default 48V)
Max Charge Current 200A 220A
Max Discharge Current 200A 220A
AC Rated Output Voltage 230V single phase 230V single phase
AC Output Frequency 50Hz / 60Hz switchable 50Hz / 60Hz switchable
Waveform Pure Sine Wave Pure Sine Wave
Max AC Output Current 43.5A 52.2A
Peak Surge Power 2 times rated power 2 times rated power
Max Conversion Efficiency 96.2% 96.2%
Communication Interfaces WiFi, RS485 WiFi, RS485
Installation Type Wall-mounted Wall-mounted
Operating Temperature -10℃ ~ +50℃ -10℃ ~ +50℃
Protection Class IP20 IP20
Product Weight 21kg 22.5kg

Applicable Scenarios

✅ Household villa rooftop solar energy storage hybrid power generation systems

✅ Rural remote areas off-grid independent photovoltaic power supply

✅ Small shops, workshops light commercial solar self-consumption systems

✅ Backup emergency power supply for families and small offices

✅ Distributed photovoltaic projects with demand for phased parallel capacity expansion

Product Competitive Highlights

  1. All-in-one hybrid design integrating MPPT charging, battery management and grid-connected inversion, support grid/off-grid/battery-free three working modes
  2. Max PV voltage up to 500V, wide MPPT voltage window to match various solar panel combinations
  3. Pure sine wave AC output, safe for all household and commercial electrical loads
  4. Compatible with 48V low voltage lithium batteries, support BMS intelligent communication linkage
  5. Multiple units parallel expandable to upgrade system power capacity flexibly
  6. WiFi wireless + RS485 wired dual monitoring interfaces for real-time data viewing and remote control
  7. Full set of safety protection functions, stable operation with low failure rate

FAQ

Q1: Can this hybrid inverter work without a battery?

A: Yes, it supports battery-free operation, solar panels can directly supply power to loads.

Q2: What is the maximum PV open-circuit voltage supported?

A: The maximum PV open-circuit voltage is 500V DC.

Q3: Can multiple inverters be connected in parallel?

A: Yes, multi-unit parallel function is available to expand overall system power.

Q4: How to realize remote monitoring of power generation data?

A: Built-in WiFi module supports mobile APP monitoring, and RS485 interface is reserved for centralized wired monitoring.

Q5: What battery voltage is this inverter compatible with?

A: It adapts to 42V~60V low voltage lithium battery packs, with 48V as default configuration.